|
|
Data Sheets
These files are in PDF format.
In order to view these files, you must have Adobe
Acrobat Reader installed on your computer. If you
do not have the Adobe Acrobat Reader on your
computer (if clicking on the below links do not bring up
the forms in your browser), Click to download.
| Greenline
Technology: |
| Multikrete
is
a rapidly setting, building material that is used
to repair concrete surfaces and lends itself to interior
spaces as well as outdoor applications. This
product may be applied to either horizontal or vertical
surfaces without necessitating pre-treatment of the
defective surfaces.
Multikrete
Powder
Multikrete
Activator
|
Fricon
Is
a rapidly setting, building material that may be processed
in cold rooms without the necessitating the per-heating
of the defective surface. Fricon is a special
building material and is available for use in various
temperature intervals for use in both indoor and outdoor
applications.
Fricon CF26 can
be used and processed in temperatures of -15 F(-26C).
Fricon CF45 can
be used and processed in temperatures of -49 F (-45C).
Fricon
Powder
Fricon
Activator
|
| |
| Mapei:
|
Epo/Bond
30
|
Novo/Plan
5
|
Planitop
20, 21, 22, 23, 24, 25 Material Data Safety
Sheet
|
Planitop
10 One-component polymer-modified fast-setting
cementitious patching and repair compound for inferior
concrete floors.
|
Planitop
12 One-component, polymer-modified shrinkage-compensated,
cementitious thixotropic fibre mortar for concrete renovation.
|
Planitop
20 Two-component, polymer-modified cementitious
mortar for concrete repair.
|
Planitop
21 Two-component, polymer-modified cementitious
mortar for concrete repair.
|
Planitop
22 Two-component, fast-setting polymer-modified,
cementitious fibre mortar for concrete repair.
|
Planitop
23 Two-component fast-setting polymer-modified,
cementitious thixotropic fibre mortar for concrete repair.
|
Planitop
25 Two-component, fast-setting polymer-modified,
cementitious fluid mortar for concrete repair.
|
Planitop
Primer Two-component polymer-modified cementitious
bond coat.
|
Quickcem
Top 101 One-Component, no curing, shrinkage
crack free, fast-setting and drying polymer-modified
cementitious mortar for concrete repairs.
|
Quickcem
Top 102 One-Component, no curing, shrinkage
crack free, fast-setting and drying polymer-modified
cementitious mortar for concrete repairs.
|
| |
| Dow
Chemical: |
Grayboard*
2.00
X 48 inch butt edge extruded foam insulation-score
|
Grayboard*
1.00
X 48 inch butt edge extruded foam insulation-score
|
Styrofoam*
2.00
X 48 inch scoreboard extruded foam insulation
|
|
|
| |
| Conspec: |
Conflow Is a self-leveling and self-finishing
polymer modified cementious based material. Used Conflow
as an underlayment for interior applications.
|
Conshake 500 Natural
A ready-to-use silica quartz aggregate surface hardener.
When evenly placed on freshly floated concrete, it provides
increased wear to the surface.
|
Conshake 600 Colortone
A ready-to use silica quartz aggregate surface hardener.
When evenly placed on freshly floated concrete, it adds
color and considerably increases abrasion resistance,
strength and durability of the concrete surface.
|
Conshake 700 A ready-to-use, finely graded, silica
aggregate, surface hardener. When properly placed on
freshly floated concrete, Conshake 700 adds increased
reflectivity to improve lighting levels with increased
abrasion resistance.
|
| Conspec 100 Non-Shrink Non-Metallic
Grout A high
performance, non-shrink, precision grout designed for
a wide range of consistencies from damp pack to high
fluidity. Meets the most demanding job conditions with
an extend work-Time providing maximum fluidity and high
strength. 100 Non-Shrink,
Non-Metallic Grout is a blend of Portland Cement,
specially blended aggregates and cementitious agents,
and can be easily pumped.
|
Conspec Silane 20 WB Conspec Silane 20 WB is a water base
deep penetrating sealer designed to protect concrete
and masonry surfaces, decks, pavements, parking structures,
ramps, bridges, marine platforms, etc.. Conspec Silane
20 WB protects Against the corrosive effects of de-icing
salts (chloride screen) moisture and weathering, to
prevent the spalling and deterioration of concrete structures.
V.O.C. compliant.
|
D.O.T. Cure W.W.
A high solids white pigmented water-based wax concrete
curing compound. Formulated to retain moisture in freshly
poured concrete. The selected white pigments reflect
the heat of the sun, keeping the concrete surface cooler.
D.O.T. Cure W.W. is a membrane forming wax based material
that seals the necessary moisture for proper cement
hydration. D.O.T. Cure W.W. is formulated to comply
with V.O.C. content limits, as required by Air Pollution
Control Regulations.
|
Orange Peel A heavy-duty biodegradable emulsified
citrus concrete cleaner/degreaser/stripper. Orange Peel
is an environmentally safe, V.O.C. compliant, non-etching
concrete cleaner used to prepare surfaces for Conspec
penetrating sealers or general maintenance. Used directly,
Orange Peel will effectively help remove common curing
and sealing compounds and cutback adhesives.
|
Overcrete An easy to apply, two-component, polymer
modified cementitious coating to resurface and restore
scaled concrete surfaces. Overcrete's thin deck overlay
system provides an attractive, decorative appearance
to irregular, damaged concrete and new concrete.
|
Polybond Dual Component Cartridge System is
a vinyl ester gel adhesive used for vertical and overhead
bonding applications and structural repairs. Also used
as grout for anchor bolts, dowels and rebar. Excellent
high/early strengths even when applied at cold temperatures
(down to 32ºF)
|
React S A chemically reactive form release
agent especially formulated to meet the demanding requirements
of architectural forming in any climatic environment.
Complies with local, state and federal V.O.C. and air
quality control regulations.
|
Spec Bond 50 100% solids, hi-mod, low viscosity,
structural epoxy adhesive used to bond fresh and hardened
concrete to cured concrete, steel to fresh or hardened
concrete, as a grout for anchor bolts, dowels and rebar,
as a binder for epoxy mortar, and for bonding other
dissimilar materials. Spec Bond 50 is ideal for injection
and gravity filling of concrete cracks.
|
Spec Bond 100 100% Solid, Hi-Mod, medium viscosity
epoxy adhesive used to bond fresh and hardened concrete
to cured concrete, steel to fresh or hardened concrete,
as a grout for anchor bolts, dowels and rebar, as a
binder for epoxy concrete, and for bonding other dissimilar
materials.
|
Spec Bond 101 100% Solids hi-mod, long pot life (LPL)
epoxy adhesive used to bond hardened concrete to cured
concrete, steel to hardened concrete, as a grout for
anchor bolts, dowels and rebar, as a binder for epoxy
concrete, and for bonding other dissimilar materials.
|
Special Patch A polymer-modified cementitious two-component
concrete repair mortar for use in thin and thick-section
concrete patching and overlays. Special Patch provides
excellent freeze-thaw resistance, superior adhesion
and resistance against the penetration of deicing salts
and other contaminants. Ideal for repairing interior
warehouse slabs or exterior concrete pavements.
|
Stripper 722 An emulsified organic solvent based
concrete coating remover, with a complex system of wetting
agents to maximize stripping efficiency. V.O.C. compliant.
|
Strong Bond A ready to use, acrylic admixture and
bonding agent designed to improve the adhesion and durability
of concrete, masonry, stucco, terrazzo and portland
cement-sand mixes to horizontal and vertical concrete
and other surfaces.
|
Ultra A clear and odorless chemically reactive
architectural concrete form release agent formulated
to release hardened concrete from most forming materials.
Environmentally compliant for use in both indoor and
outdoor applications. Contains no diesel fuel, common
lubricating oils, waxes, or kerosene. V.O.C. compliant.
Back
to the top |
|
